These problems are eternal in our homes, but now we have brought definitive solutions to help you with this
Use the first spray bottle of mixture if you have never encountered the classic problem of mold and humidity inside your home.
This problem is classic, it causes a lot of headaches in 5 out of 10 adults and, sooner or later, mold and damp appear in the corners.
Therefore, to help you on this difficult path, we have prepared definitive solutions to eliminate these unwanted people.
6 solutions to permanently eliminate mold and humidity at home
01. Mixture with bleach
You will need a spray bottle, 100 ml of normal water and 300 ml of bleach.
The first step is to put the two waters in the spray bottle and shake them to mix well. Then, spray on parts of the house that are permeated with moisture or mold. Then let the bleach act for 10 minutes.
Then, wipe the alcohol with a cloth and then use apple cider vinegar to clean it and not leave the area with a strong smell.
02. Mix with alcohol
For the alcohol mixture, you will need a spray bottle, 100 ml of bleach and 300 ml of 70 alcohol.
The first step is to put the two liquids in the spray bottle and shake them to ensure they adhere well. Then, spray on parts of the house that are permeated with moisture or mold.
Let the bleach with alcohol act for 5 minutes. Then, wipe with a dry cloth to remove any excess.
03. Mixture with apple cider vinegar
Just like bleach, apple cider vinegar also has a quick effect on moisture and mold accumulated in the corners of the house.
Therefore, you must fill a container with pure apple cider vinegar and use the paint roller to spread the liquid over the affected areas. So, in less than 10 minutes, the stains disappear almost like magic.
04. Sodium bicarbonate
Take a spray bottle and mix 240 ml of white vinegar with 1 tablespoon of baking soda. Mix well and wait for the bubbles to subside. Once this is done, you will apply it to the affected areas and leave it to act for around 10 minutes. Finally, dry the mixture with a clean cloth.
05. Hydrogen peroxide
In a spray bottle, you will put a 3% concentration of hydrogen peroxide, apply it to the affected area and leave it to act for 10 minutes. Then, wipe with a clean cloth to remove the mold and stains left by it. Then, finish with a cloth to dry.
06. To remove mold from the wardrobe
Finally, to avoid mold in this area, open the wardrobe doors to allow air to circulate, if possible, remove everything inside and place it in the sun. Remove drawers and shelves and also place them in the sun. In areas with mold or moisture stains, apply a cloth dampened with water and vinegar.
So, follow the Portal 6 on Instagram: and stay up to date with lots of news and curiosities, all in real time for you!
