Just a moment to On the iron plate, burning or other dirt arose. Unfortunately, this situation can strongly make it difficult to use this equipment, because it is easy to burn and destroy pressed fabrics. Is it possible to restore your old cleanliness? Thanks to aluminum foil, it can shine again like new.
Frequently used iron loses impeccable purity, and burns or other dirt appear in its place. These like to form when ironing inappropriate material or a moment of inattention. To continue using this equipment, you do not need to reach for store specifics right away, because The solution can be found in kitchen or bathroom cabinets.
That the iron will serve for many years, However, the basis is proper care for this equipment. We are talking here, among others, about ironing appropriate fabrics or using the recommended demineralized water. In addition, it is important cleaning the iron from the inside, Because regular descaling has a long impact on how all the equipment will work.
As for the iron’s surface, it is also important to clean it regularly. When visible dirt appears on it, you need to react immediately. Fresh burns and traces come down much better. For this purpose Many people use pastes made of baking soda, lemon juice, table salt or even toothpaste. You can also reach for such a solution that does not need much preparation, which means that it can always be at hand.
May interest you:
A good and proven solution that does not need special skills is to use aluminum foil. The product has a versatile use, which can also be a real ally when it comes to cleaning the iron. To deal with burning the iron’s surface or with other dirt, a piece of foil is enough. Before starting cleaning, Make sure there is no water in the iron tank, which could cause further dirt.
When you can be sure that the iron is ready for use, Take about 30 cm of aluminum foil and gently crush it. The surface of the foil should be slightly snoring, so it will be able to work better for dirt. Now Just turn on the iron to the average temperature level, Be sure to use a pair.
The heated iron remains gently wiping the crushed foil. It is important to do it gently and circular movements. Thanks to this, the dirt will disappear and the surface will not be scratched or damaged. Interestingly, for stronger dirt It is worth connecting a trick with foil along with the use of baking soda. Such a duo will work for strong burns or old dirt. Finally, wipe the iron surface with a wet cloth to get rid of the remains of dirt. Thanks to this, the device will be clean and ready for further action.
The method with aluminum foil is a good choice for an iron with a metal foot. The device with a ceramic or teflon coating is much more delicate, so the crushed foil can leave unwanted scratches, so before starting to act, it is better to check it.
Check also:
