Did the iron burned? With our tip you put it in its original state…
Ironing is a religion. No wonder this homework is one of the least popular. “When I was young, I didn’t mind, but as soon as children came into the world, one big hell became the laundry,” admits the reader Jarmila from Dobříš and adds that a large family means bunch of unmanageable linen for her. “When I see the pile of growing up with every washing, I have depressed it. My husband and I started to call her a fun. He is almost a family member, ”he laughs.
The video author, DIY Network will show you how to remove the baked part from the iron. More on the channel www.YouTube.com.
Source: YouTube
Dirty relay
Are you similarly? Then you are not alone. Many Czechs from a similar situation minimize only the most necessary. But even at such a frequency, you may be burned. “Unfortunately, this accident arises from the wrong use of the iron. Most often it is a poor temperature setting for certain fabrics, ”says the expert, continues,“ If you do not remove the baked parts, you can get dirty with additional laundry. And that’s a shame. Therefore, start with it now! ”
Cleaners
According to experts, the burned areas should not scrub aggressive cleaning agents that can only scratch the iron. One solution is special sprays for cleaning iron. They are usually suitable for all types of iron, whether they have aluminum, stainless steel or ceramic surfaces. Also practical is the cleaning rod, which removes the appliance and at the same time makes the ironing surface smoother. All these cleaners work immediately and cost only a few tens of crowns!
Mary lines with citric acid
“I don’t buy anything. I have proved my good advice from my grandmother, ”says reader Diana of Klatovy, revealing a family tip for cleaning the iron: Dissolve 2 tablespoons of citric acid. Once the citric acid is crushed, immerse the cloth in the solution and place it in the baked area of the iron as soon as it is soaked. Leave it for 10 minutes and then clean the iron. You will see that everything will go like butter!
Iron with a non -stick surface
By the way, if you buy a new iron and want to avoid burning it, get one that has a non -stick surface. “It’s like a Teflon pelvis. Nothing does not bake on her and glides beautifully on clothes. Therefore, ironing costs almost no effort with her, ”recommends the expert.
Sources: www.uclideklid.eu, https://www.mall.cz
