Stura the stove’s nozzles and save on the gas: here’s how to do it

If the stove’s flame is weak or irregular, the problem could be in the obstructed nozzles. Cleaning them is simple and will help you save gas.

It may happen that the gas stove It does not work as it should: the flame appears weak, irregular or, in some cases, it does not turn on at all. If you have already checked the cylinder or the system and the problem persists, probably the nozzles of the hob are obstructed. This happens due to the accumulation of food, fat or dust residues, which limit the passage of gas and reduce the power of the flame.

Fortunately, there is a simple and effective do-it-yourself method to solve the problem. Cleaning the nozzles not only improves the combustion and cooking of food, but also allows to reduce the consumption of gas, with savings on the bill. A few tools are enough and a little attention to bring your stove back to maximum efficiency. By following a few simple steps, you can restore the power of the flame and cook without inconveniences. Here’s how to do it!

Because the flame of the stove becomes weak or irregular

When notes that the Stove takes longer than usual to warm the pots or that the flame goes out easily, the problem could be tied to Obted nozzles. These small holes, from which the gas comes out to feed combustion, can accumulate residues of food, fat or dustreducing the passage of the gas and compromising the correct functioning of the fires.

Many erroneously think that the problem is linked to the gas pressure or the cylinder almost download, but it is often enough accurate cleaning to bring the stove back to maximum efficiency. In addition, a prolonged obstruction can increase gas consumption, making you spend more on bills. That’s why it is essential to intervene immediately.

How to lift the lummer’s nozzles in a few steps

Per restore a powerful and constant flameyou have to proceed with the cleaning of the nozzles. It is a simple operation, which you can do in a few minutes without the need for particular tools. Before starting, however, it is important to follow some safety precautions.

• Close the gas: Before any intervention, make sure that the gas is off to avoid dangerous dispersions.
• Remove the fires: Remove the grids and burners, in order to have direct access to the nozzles.
• Prepare a suitable tool: You will need a thin ironlike that of a staple, or a resistant needle. Wrap one end with a little insulating tapeso you will avoid damaging the holes.

Now you can proceed with the actual cleaning.

Steps to lift the lumberjack nozzles

The following steps must be performed after taking the necessary precautions indicated. Now follow these simple step to eliminate obstructions from the nozzles:

• Insert the wire in the oil holemoving it gently back and forth to remove any residues.
• Repeat the operation on all firesensuring that each nozzle is perfectly free.
• Blows in the holes to eliminate any traces of dust or food residues stuck.
• Reassemble burners and gridsbeing careful to position them correctly.
• Turn on the stove and check the flame: it should be stronger, uniform and stable.

This operation will help you to Improve the cooking of foodsavoiding waste of gas and optimizing the performance of the hob.

Because it is convenient to clean the stove’s nozzles regularly

Clean the nozzles It is not just a matter of efficiencybut also of energy saving and safety. If the flame of the stove is weak, you will have to keep the gas on for longer to cook, consuming more than necessary. In addition, a prolonged obstruction can cause gas accumulation and increase the risk of dangerous leaks. Here are some reasons why you should perform this maintenance regularly:

• Avoid waste of gas And lower the bill.
• The better the power of the flamemaking cooking more uniform.
• Reduce the risk of malfunctions And stretch the life of the stove.
• Present any dangers related to gas.

To keep your hob always efficient, repeat this at least once every two monthsor more often if you cook frequently.

Now that you know this simple do-it-yourself trickyou can finally Solve the weak flame problems on the stove without having to call a technician. With a few steps, guarantee a better gas performancefaster cooking and savings on the bill. Don’t forget to carry out this periodic maintenanceso as to always keep your stove at maximum performance and cook without inconveniences!

Photo © Stock.adobe