Is the noisy operation of the washing machine to be crazy for you? Sprinkle what is the cause and find the solution …
It is not possible to work without a washing machine. But what to do when your favorite appliance cancels neighbors? “I don’t know what’s going on, but I can hardly start to wash, so the washing machine ramps. He jumps, bangs… In short, he can hear all over the house. A few people have already complained, but I don’t know what to do with it. I have to wash and so I try to catch at least the time when the neighbors go out with the children, ”says Mrs. Alena of Bruntál, who would like to replace the washing machine as soon as possible.
The video author Beko Czech Republic will advise you how to minimize the noise of the washing machines during washing. More on the channel YouTube.com.
Source: YouTube
Estimating the problem
Do you have a similar problem? According to experts, it may not be so hot. “I see the replacement of the washing machine as the last solution,” the expert is heard and recommends finding out what the washing machine is… To estimate it, you do not need to call repairers right away. You can do it yourself, according to our instructions. Your task will only be to find the sound that your washing machine makes and we will try to outline the possible cause of problems… So let’s do it!
Bang
Do you feel that your washing machine as if dancing? Halsna banging is caused by turning objects inside the drum. According to experts, the cause of this unpleasant sound is released buttons or zippers. “These items can also be stuck in the door seal, thus turning the” work cycle “into one large scratch or rattle. In some cases, it even happened that the objects got through the sealing drum from the cloak and rattled between the bath and the drum. Their rotation causes a dune sound like a banging, ”says the expert. According to him, the byte should not use the washing machine until the expert sees and repaired it. Otherwise, there would be a risk of damage to the washing machine or even heating.
Click
Top -clicks! This sound is a clear signal that you have a defective or damaged water supply valve in the washing machine. “This sound resembles the clicking of an old camera,” says the expert, adding that this type of valve can sometimes rust or clog the lumps or other impurities. You can usually identify the defective inlet valve by the fact that the washing machine does not fill with water.
Grind
Does your appliance make the sounds similar to grinding grinding? The cause may be an overloaded drum and so the easiest solution is to reduce a little laundry and will be calm… “Grinding sounds can be caused by worn or rusted drum deposit,” the expert says and adds that it is the bearing that holds the drum in the right position so that he can rotate on his axis. Therefore, the squeaking sound is a sign that the bearing is not cool and literally calls for replacement. And unfortunately it is already on an expert.
Whistle
When the washing machine is filled with water, it makes a sparkling sound. “However, whistling may mean that the pressure of the water supplied to the washing machine is too big,” says the expert, adding that the noise is particularly growing during the rinse cycle. The reason is again either a damaged deposit of the drum or driving pulley. These defects are still caused by a squeaking or dune sound. So take this sound concert as a warning and rather call the technician.
Clean, clean, clean….
Before you call the repairman, check out if there are any remnants of clothing in the drum – such as buttons or zippers. “It is also good to check the place under the seal, where various objects are captured and the washing machine makes a special rattle sound,” advises the expert, adding that the best is to clean the seal, because there are adhesive lumps.
Reset the water pressure
According to an expert, you can prevent the washing machine from lowering the water pressure that is supplied to the washing machine. What can you do about it? “You move the washing machine from the wall, you will find the warm and cold water valve and turn the controller screw to the left. This will slightly reduce the flow of water and will be calm, ”advises the expert.
Replace the inlet valve
Such a clogged power valve can make your life hell. According to an expert, you can clean it yourself, but it is much better to replace it completely. You can buy replacement valves normally in the hardware store. You just have to be careful that the selected type corresponds to the type of valve you have at home. If that doesn’t help, you will have to call an expert.
Sources: www.bosch-home.com, www.samsung.com
