The natural stone It is elegant and resistant, but keeping it brilliant can be complicated. Discover the best method for effective and safe cleaning.
The natural stone It is a choice elegant e resistant for floors and coatings, but always keep it bright It can be a challenge. If you use the wrong products, you risk ruining it, but with the right method of it beauty will last over time. Proper cleaning and maintenance will make the difference, preserving its original color and structure. Find out how to clean it and treat it in the most effective way without damaging it.
The Maintenance of natural stone It is essential to keep the beauty and the resistence. Being a material poroustends to absorb dirt and spots; So it is important to avoid aggressive detergents which could ruin its surface. THE acid products they anti -valcare they are absolutely to be avoided, since they can corrodere the stone and leave permanent halos. Adequate protection, such as the application of specific sealants, can help reduce dirt absorption. Also, one constant cleaning With delicate products it will guarantee a long duration without compromising the structure of the material.
How to keep the natural stone always shining
For effective daily cleaning, you can use a delicate solution based on Neutral soap and soap. Just dip a soft cloth in the solution and gently pass it on the surface. If you find superficial spots, pretract by rubbing slightly with a damp cloth and then passes the vacuum cleaner to eliminate any residues.
If you want to speed up the process, you can opt for one pressure washera perfect tool for washing natural stone without causing damage. This method is particularly suitable for external surfaces, where dirt tends to accumulate more easily. Remember, however, to regulate the pressure so as not to erode the surface of the stone.
How to eliminate difficult spots without ruining the stone
Despite regular maintenance, some stains can be more obstinate and difficult to remove. To clean the natural stone without risk, it is essential Avoid products containing acids, ammonia or bleach. These can alter the coloring and compromise the structure of the material.
Alternatively, you can rely on neutral detergents or alkaline basespecific for this type of surface. To better treat the most stubborn stains, follow this procedure:
- Dilute the detergent chosen in abundant water.
- Pour the solution in a sprayer to facilitate the application.
- Vaporize the product directly on the stain and let it act for a few minutes.
- Rinse abundantly With clean water to eliminate any detergent residue.
This method is safe and will help you remove even the most difficult stains without compromising the integrity of the stone. If you have doubts about the result, always try treatment on a small hidden area before applying it over the entire surface.
How to eliminate spots of oil and fat from natural stone
If you are faced with oil or fat stainsa specific treatment is needed to prevent them from penetrating deep. The best solution is to immediately absorb the excess liquid without rubbing, in order not to worsen the situation.
An effective remedy consists in the use of Borotalco or flourperfect for absorbing oily substances. Here’s how to proceed:
- Sprinkle the stain with a good amount of borotalco or flour.
- Let For at least a few hours, so that the product absorbs all the oil.
- Remove the dust With a soft brush without scratching the surface.
- Rinse with warm water It is a damp cloth to eliminate any residue.
If the stain persists, repeat the treatment or use a specific neutral detergent for natural stone. With these precautions, your floor or coating will return to shine without any damage.
Take care of yours natural stone With the right methods it will allow you to keep it always perfect and to avoid expensive interventions to repair any damage. With these tips, you will no longer return back and your home will shine with new light!
Photo © Stock.adobe
FOLLOW CASTLI NEWS ON
