Cleaning satin steel without leaving scratches or halos is not complicated as one might think. With some natural remedy, of those who often go unnoticed in the pantry, you can get truly remarkable results, without effort and without risk.
L’satin steel without scratches or halos It is the dream of those who love to see ordered and bright surfaces, but do not want to fill the chemical spray house. The problem? It is that this material, however fascinating and refined, is dirty with an almost irritating ease. It is not enough: an imprint, a dash of forgotten water, a marker. And the magic vanishes. Still, it continues to be everywhere, especially in the kitchens with a contemporary look or in high -end appliances. There is one reason: he manages to give character, but with discretion. It is as if elegance whispered, without raising the voice.
Right, keep it lucid and uniform It’s not really a kids game. It serves delicacy, constancy and some more precautions. The question arises spontaneously: do specific and expensive products really serve? The truth surprises: no, indeed. It takes little. And the natural remedies, those of tradition, continue to give a hard time to the most modern formulas.
Curious how the most common damage does not derive from who knows what accidents, but simply from bad habits. A sponge too rough, a wrong detergent, or the haste that makes you forget the drying. Thus the metal loses shine and fills with those annoying glazes. But do not panic: with a pinch of attention and the right allies, the surface returns to shine. Without stress, and with immediate satisfaction. Here then are three natural solutions that deserve to be put to the test, even just out of curiosity.
How to clean satin steel without scratches: water and baking soda
When it comes to satin steelthe idea that serve targeted and perhaps expensive products immediately jump to mind. But in reality, among the simplest things you already have at home, there is an unsuspected ally: the baking soda. It is inconspicuous, it is true, but surprisingly effective. It has that light grain that does not scratch and, at the same time, removes annoying residues with ease and ease.
No complicated formulas: Just add two tablespoons of baking soda with a little water, just as needed to obtain a soft pasta. The important thing is that it is not liquid, but neither too dense. In short, a middle ground. It spreads gently with a soft sponge or a microfiber cloth, making circular movements without too much pressure. Better to let it act for a moment and then rinse with warm water. At that point, a dry cloth makes the rest. And the surface? He returns smooth, clean, almost as if he had just been mounted.
Curious as often ignore that Bicarbonate can make miracles even with the lighter incrustations. As long as it is not ancient spots. In those cases, a second pass is enough, and go. No risk of rigor or opacification. What not always guaranteed by other more aggressive products, than in the long run … well, some signs leave it.
Remove halos and limestone with white vinegar: a natural solution
The Aloni on satin steel They are often caused by limestone residues or hasty drying. When the water evaporates, it leaves the whitish traces behind them that turn off the shine of the surface. A simple but incredibly effective method to eliminate them is the use ofwhite vinegar.
Without diligating it, you can directly pour a few tablespoons on a soft cloth and buffer the affected areas. After a few minutes, just pass a slightly moistened sponge and then dry carefully. If the smell of vinegar is too pungent, a useful make -up is to add a drop of citrus essential oil: not only masks the acidity, but also leaves a pleasant perfume in the air.
- Do not use never metal straws or rough sponges
- Avoid too energetic movements
- Better always work Following the satin satin
In addition, vinegar is also perfect for light burning stains, for example on hobs or around the stove. But be careful: it is always better to test first on a small hidden area, because not all types of satin reacts in the same way.
Polish satin steel without ruining it: try with lemon
Give back brilliance to satin steel It is often the most delicate phase, because many polishing substances tend to grease or, worse, to leave streaks visible in light. Among the natural remedies, the most effective and less invasive remains the lemon. His juice acts like a natural antioxidant, capable of reviving the metal without damaging it.
It is recommended to Use a soft cloth Subbuced pure lemon juice, slightly passed on the surface already clean and dry. The movement must be delicate, almost like a caress. After a few moments, the surface will appear clearer, more homogeneous, almost new. A small extra trick? Rub the already squeezed lemon peel: release natural oils that intensify the polishing effect.
The lemon also has one more advantage: neutralize the smells. And for those who love details, you can also create a mixture of lemon juice and baking soda to polish small steel objects, such as cutlery or handles.
One last tip: constant maintenance and delicacy
L’satin steel Don’t forgive errors. Just a sponge too rough or too energetic gesture to leave a permanent mark. This is why, beyond natural remedies, it is essential to adopt constant and delicate maintenance. Dry immediately after each wash, use soft clothes, avoid stagnation of water.
It is believed that it is enough to clean in the bottom once a weekbut it is often better to make small daily interventions. A quick pass with a dry cloth can avoid most of the problems.
After all, take care of the satin steel does not require extreme effortsjust a little attention and simple ingredients. And the satisfaction of seeing the surface return to shine, without halos and without scratches, is priceless.
Photo © Stock.adobe
FOLLOW CASTLI NEWS ON
