Tired of matt and scratched bath? Yellow spots bring you to despair? We have solutions for you that will surprise you with its simplicity and efficiency!

Acrylic bathtub is a decoration of any bathroom, but its maintenance can sometimes be a good challenge. Many women are troubled with unsightly spots or loss of shine that can spoil the impression of the whole bathroom. Instead of expensive detergents, however, it is enough to reach for the ingredients you certainly have at home in the kitchen. We have prepared a complete guide for you to return your bathtub to the original look without unnecessary spending and effort.

Secret weapons from your kitchen against durable stains

Acrylic is a durable material, but it has its weaknesses. With incorrect cleaning, scratches and stains are easily formed on it. Aggressive cleaning agents containing chlorine, alcohol or ammonia can irreversibly damage your bath. Therefore, always reach for fine cleaning agents and soft rags.

Forget about hard brushes and harsh sponges to clean the acrylic bath. Use soft cloths and fine sponges instead. Also, avoid high chlorine cleaning agents, abrasives or alcohol. Ammonia is particularly dangerous for acrylic surfaces, so never use it.

In the stores you will find special fine cleaning agents that effectively remove limescale, rusty spots or grease. Some contain even preservatives that make the bathtub remain clean and resistant to deposits longer.

Miraculous transformation of dirty bathtubs effortlessly

Regular cleaning of the acrylic bath is the key to its long life. The more often you wash it, the fewer problems you will have resistant dirt. However, we do not always have time for regular maintenance.

When you encounter a very contaminated acrylic bath, you will need patience. Removing resistant stains and scale requires a power, but you cannot use in this case so that you do not scrape the surface. Therefore, apply your favorite detergent to the bath surface (home or bought) and let it work for 10-20 minutes. Only then start cleaning gently with a soft cloth or sponge.

When cleaning the acrylic bathtub, smudges may be a problem. Therefore, after washing the bathtub not only rinse thoroughly, but also dry with a dry cloth.

Goodbye, yellow spots! These tricks will warm you up

Acrylic is durable, but over time it may appear nasty yellow spots. Removing them is a challenge, but you don’t have to reach for expensive professional cleaning agents right away. We have home solutions that use cheap and common ingredients that are gentle on the bath surface.

The first miraculous aid is vinegar. Simply mix it with water in a ratio of 1: 1 and apply to the stains. Vinegar has disinfectant and whitening properties. It looks gently and if you do not use a rough cloth or brush to remove it, it will not damage the bath surface.

Baking soda has a similar effect. Just mix it with a little water to produce a thick paste and apply it to the stains. After a few minutes, gently wipe with a soft cloth and rinse with water.

Lemon juice also has brightening properties. You don’t even have to juice lemons. All you have to do is cut the lemon in half and rub the selected parts of the bathtub. Rinse with warm water after a few minutes. If the result is not satisfactory, repeat the procedure.

Bath as new: the secret of the perfect shine revealed

The acrylic surface is naturally smooth and shiny. However, due to too rare cleaning or use of inappropriate materials, it can become dull and scratched.

When you have a damaged bath that has lost its shine, a renovation may be needed. In the stores you will find ready -made kits that contain polishing pastes and liquid acrylic with a hardener. Fine sandpaper will also be useful. First, you should use it to smooth out the scratched acrylic surface before covering it with polishing paste and liquid acrylic.

This will clean the bath in a short time. All you have to do is mix with water