What about outdoor tiles covered with mosses and lichens? Of course, the pressure cleaner can help and work with it looks so elegant as the results more than satisfactory. But there are a number of other, cheaper solutions and you probably already have the necessary resources at home.
Learn not to use chemistry
It will not be without work, but it goes without chemicals. Class cubes or other outdoor tiles definitely suffer from bad weather. Over time, they can be dirty not only by normal use, but also by constant rain mixed with dust mixed. In addition, mosses and lichens will grow and you have the tiles suddenly green. It is common and there is nothing to be ashamed of. But if you want to have a sidewalk or other cobbled space nice and clean, you can easily get rid of mosses with home means.
Before we get how to clean with conventional domestic agents and durable dirt on the path, let’s tell briefly why not use chemicals and industrially produced strong means.
Every time you use them, you kill much more than just moss. These strong cleaners act not only on the surface of the tiles but also in its surroundings. This destroys microorganisms, earthworms and useful mushrooms that are key to healthy soil. In addition, water and soil pollution occurs. Do you think that only in a small thing you don’t mind? Every intervention in biodiversity is calculated sooner or later. And this is how it does the whole street of your neighbors.
Home remedies to clean the tiles
When using domestic and often natural means, we find that even little can do great damage. For example, salt is one of the highly recommended and cheap means. But you probably suspect that you can do great damage to the sidewalk. Salt can not only get into the surroundings and destroy your beloved greenery, but also does mischief in the pavement itself.
It can be similar to IS boiling water. Theoretically, the tiles can crack.
Vinegar is a little more suitable and yet sufficiently effective. It has almost every AK at home to dispose of dirt, lichens and mosses from the surface of the cobblestones. It just needs to be diluted with water in a ratio of 1: 1. It is ideal to apply acetic water with a sprayer to prevent overflowing into the surroundings. Leave the mixture for about half an hour, ideally during a dry and warm day. Then take a brush or a rough broom, scrub the tiles and flush with clean water.
Bad soda is also very effective, especially if you have a problem not only with dirt, but just mosses and lichens. Sprinkle the surface of the tiles evenly with soda and allow the soda to act for 24 hours. It is ideal to use in infidel weather and only a slightly damp or almost dry surface. The next day, just clean the sidewalk using a rough brush or broom.
Because you need more soda, we recommend buying a kilo or larger package. Even a kilo of soda is cheap, and because it is a multifunctional means, you do not have to worry about storing the bag too long.
Elegant cleaning with vaps has its limits
An elegant solution can also be the use of a pressure cleaner or lugs. But be careful. It is not in vain that the vapka has different settings to control the water pressure. Vapka is not suitable if the sand or grout from the joints. It is only suitable for very tightly sessile pavement. If you decide to vapku, set the device only to moderate pressure.
Strong pressure can affect some materials erosive, especially in the case of frequent repetition of such a method of washing. The advantage of the lugs is that high water pressure deprives the tiles of all dirt. However, the amount of water used is dependent on your skill and procedure. You have to take care of the vapk, clean the filters and descend and, of course, has a high purchase price. Now definitely compared to a kilo package of baking soda.
Sources :,
