Deep cleaning at home: in the first phase of the year, when the air becomes lighter and the sun strongly enters the windows, you often feel the need to refresh the environments. But be careful: there are common mistakes to avoid, especially with radiators and fixtures, which risk compromising the result.
Thoroughly It means taking care of the details, even those that usually neglect. Precisely for this reason, there is a tendency to underestimate some precautions that instead make the difference. What are the most widespread wrong practices and, above all, how to avoid them?
It is the right time to get on the sleeves and give new light to the house, starting from two points often forgotten but fundamental for Hygiene and wellness.
The radiators: attention to these common mistakes
When it comes to cleaning of radiatorsthe most classic error is to intervene only superficially. It is thought that passing a rag on the external surfaces enough, but in reality the dust lurks above all among the internal cracks, where it stagnates for months.
A frequent error is to use too much water or spray products directly on the metal parts: this can favor the formation of rust or unsightly spots. Better to act with a bare cloth and, above all, with the help of a vacuum cleaner with thin spout or one soft bristle brush.
Another frequent forgetfulness concerns the moment of cleaning: it is often done in winter, while the calories are hot. This is a risk to health and for the success of work, because dirt can more easily attach to wet and warm surfaces. Better to wait for them to be completely cold.
Finally, watch out for the back! Often invisible, but not for this exempt from dust and cobwebs. A simple mirror can help control the status of the radiator without moving it.
Fixtures: a cloth pass is not enough
Clean the window frames It requires time and method. It is not just about polishing the glass, but of removing everything that accumulates in the less visible corners: dust, humidity, mold.
The most common mistakes include:
- Use the same product for glass and frames (especially if in wood or PVC)
- Forget the gaskets, which can be ruined and losing hold
- Neglect the sliding windows guides
- Do not dry after washing, leaving halos or residual humidity
For effective cleaning, it is better to use specific products for each material. The gaskets, for example, must be treated with a soft cloth and maybe a small amount of glycerinwhich helps to keep them elastic. The tracks can be cleaned with an old toothbrush and a mix of water and vinegar.
And what about the glass? Better to avoid them those famous newspapers that once used to dry them: today they risk leaving ink stains. Better a well squeezed microfiber cloth.
Small gestures that make the difference
Even if they look like details, radiators and fixtures they affect the quality of air in home and energy efficiency. A dirty radiator warms less, while a neglected window can become an access route for dust and drafts.
It is worth dedicating a few hours to these interventions with the right tools and a pinch of patience. Do not need expensive productsthe right method is enough: vacuum cleaner, soft clothes, maybe an old toothbrush, and a little more attention. Thus, the house finds light and freshness, and you really breathe a new air.
Why yes, the deep cleaning It is not just a matter of appearance: it is a way to take care of yourself, starting from what surrounds us.
Photo © Stock.adobe
FOLLOW CASTLI NEWS ON
