Tired joints in the bathroom or kitchen reveal that your home needs a revival. With our tricks, your joints will shine clean in time shorter than a coffee break!

Dirty joints on the floor? Try these miraculous solutions

Floor joints are a magnet for dirt. Shoe sand, crumbs and moisture are faster than you would expect. Try these fast methods instead of the scrubbing hours.

Mix three parts of soda bicarbonate with one part of water to a thick paste. Apply it to the joints with a toothbrush. Spray with a solution of vinegar and water (1: 1) and follow the bubbling that signals the beginning of the chemical reaction. After 15-20 minutes, scrub the joints with a brush, rinse and dry.

The second trick is hydrogen peroxide. Mix one part of 3% peroxide with one part of hot water. Add 1-2 tablespoons of soda with heavy soiling. Spray on the joints, leave for 20-30 minutes, scrub, rinse and dry. The whitening effect will be immediate.

Jackets in the shower – Fighting with moisture and soap movie

Moisture, soap residues and insufficient ventilation create an ideal environment for deposits and molds. Short, five -minute cleaning every week will significantly reduce the deposition of new impurities.

Try the home trio: mix two tablespoons of soda with one tablespoon of vinegar and add 5-7 drops of tea tree oil. A foaming is a paste that penetrates the joints and softens the deposits. Leave for 10-15 minutes, scrub and rinse.

After cleaning, apply an impregnating agent to the joints. It creates a barrier that limits the penetration of dirt and fluids, making future cleaning easier.

Mold in the joints – not just an aesthetic problem

Mold in joints is a source of allergens and toxins that can cause respiratory problems. If you do not respond quickly, the mold will penetrate deep into the joints.

An effective combination is vinegar and steam. Spray vinegar on the joints and use a steam cleaner after five minutes. Hot steam increases the efficiency of the vinegar and disrupts the mold structure. After 10 minutes scrub, rinse and dry.

The second option is chlorine preparations. Mix one part of the bleach with four parts of water. Do not forget gloves, glasses and good ventilation.

The third solution is oxygen whitening agent, which is more gentle to the color joints. After mixing with warm water, it releases active oxygen, which brightens the joints and destroys fungi spores.

Yellow gaps in the shower – fight with minerals

The yellowish coating on the joints is often the result of depositing minerals from hard water. Wipe the joints with freshly squeezed lemon juice, leave for 15 minutes, rinse and dry.

The second culprit of yellowing is a soap film. Use a squeegee to remove excess water and cosmetics remnants after each bath.

If natural ways are not enough, try hydrogen peroxide with the addition of soda – this combination can do wonders with the most durable spots.

Miraculous tricks. How to clean the chemistry of the kitchen without chemistry!