If the burning is superficial and did not damage the pot structure (e.g. cracks, enamel chips or distortion), the vessel can be saved. For this purpose, we must remove the remains of burning to avoid the penetration of undesirable flavors or substances into dishes, e.g. water with vinegar.
Vinegar, thanks to its acidic properties, is an irreplaceable ally in the fight against burns. To effectively clean the pot, Prepare a solution of water and vinegar in a 4: 1 ratioSo that he completely covers the burnt place. Bring the mixture to a boil and cook 5-10 minutes.
After cooling the fluid, gently remove the burning with a wooden or silicone spatula so as not to damage the surface. If the burning is persistent, leave the solution a few hours before scrubbing. This method works best in the case Stainless steel potsbut be careful with enamelled vessels, maybe long -lasting vinegar may reduce the gloss.
Baking soda is one of the main characters in the home arsenal of cleaning agents. Its delicate abrasive properties and the ability to neutralize odors make it perfectly copes with difficult dirt. Prepare the paste, stirring soda with a little waterand apply it abundantly to a burnt place. Leave 3-6 hoursand in the case of extremely difficult stains – even overnight.
See also:
Then gently scrub the pot with a soft sponge or a nylon brush. Soda is safe for most surfaces, but avoid its use on aluminum vessels, as it can cause corrosion or discoloration.
Kitchen, although inconspicuous, is very effective in the fight against burns. Pour a few tablespoons of salt to the bottom of the pot, add a small amount of water to create a thick slurry, and leave for 2-4 hours. If necessary, you can gently heat the mixture to speed up the process.
After this time, the burning should be easier to leave – just wipe the surface with a soft sponge. Important: Never use dry salt for scrubbing delicate surfacessuch as Teflon, because it can scratch them. The salt solution is safer and equally effective.
Citric acid is not only a burner of burns, but also a way to restore the pots of shiny cleanliness. Pour 2-3 teaspoons of acid into the pot, pour water so that it covers the dirtand bring to a boil. Cook for 5-7 minutes, and after cooling, wash the dish as usual.
The acid works gently, but effectively, dissolving burning and restoring shine. It is especially recommended for stainless steel and enamel pots, because it will effectively clean them, but also remove minor discoloration.
Dishwasher tablets, thanks to the content of enzymes and strong detergents, can work wonders in the case of persistent burns. Melt half the tablet in hot water in a potso that it covers the dirty place and leave it on 1-3 hours. If necessary, gently heat the solution to strengthen the operation.
Then remove burning with a soft sponge. This method is universal and effective, but it requires caution at Teflon, because soaking too long can damage the surface.
Before using any of the methods, make sure it is suitable for the material from which your pot is made. Inadequate agents can permanently damage the vessel:
- enamelled pots: Avoid vinegar soaking long -term, because it can matt the enamel and deprive it of gloss. Short -term use is safe, but you should thoroughly rinse the dish;
- aluminum dishes: baking soda and other alkaline measures can cause corrosion or discoloration. Choose citric acid or salt in a solution;
- non -stick surfaces (Teflon): Avoid scrubbing with salt in dry and too aggressive methods, such as prolonged soaking in a dishwasher tablets that can damage the coating.
In the case of stainless steel Most methods are safe, but for the best effects use citric acid or vinegar, which additionally restore the glow.
