I mowed oxidized water and applied on dirty joints, and the dirt was cut without scrubbing
Dirty joints are the bane of every housewife. Especially kitchen and kitchen quickly lose their appearance. Dust, mud, fat can do strongly between the tiles and often cleaning them is associated with labor -intensive scrubbing and the use of strong chemistry. Cleaning joints in home methods is as effective as using strong chemistry, and at the same time is certainly safer. And what is the best to clean the joints so that you don’t have to scrub them? It is worth using products that most of us probably have in their kitchen, and are underestimated cleaning agents. Some time ago I was looking for myself in my home and came across a brilliant trick. I found the recipe on the web and I turned to the bull’s -eye. It is enough to mix this ingredient with hydrogen peroxide and the formed slurry on dirty joints, and dirt without laborious scrubbing.
A home way to clean the joints without scrubbing. How does it work?
My homemade my home – both on the floor, in the bathroom, but also in the kitchen, consists in using two ingredients: hydrogen peroxide and baking soda. Such a paste, of course, will work in the case of light joints, because in addition to the cleaning properties, it blends the joints of the tiles. Baking soda, which is perfect for removing dirt from light tile joints, for example white or beige. This is due to the fact that it has abrasive properties and thanks to them helps to remove mechanically pollution. In turn, hydrogen peroxide easily removes discoloration and stains, restoring the fugges of the bright color. That is why it is a perfect duo in the fight against dirt in joints.
Cleaning the joints with soda and hydrogen peroxide. How to prepare and use paste?
Pour a pack of about 200 g of baking soda into the bowl. Then gradually add hydrogen peroxide, stirring until you get a thick paste. The consistency should resemble toothpaste. Apply it to the tiles welds with a brush (in the case of the floor, vacuum it before). Leave the paste on the joints for about 30 minutes. In the case of very persistent dirt, you can extend this time to an hour. After the time of operation, scrub the welds with a brush, making vigorous movements. Finally, rinse thoroughly with clean water. You can use a sponge or cloth to remove the remains of the paste and dry.
Recommended article:
