Oil stains disfigure the cobblestones? Once and for all you will remove them from the driveway

by Andrea
0 comments
Instead of drinking, pour on the cobblestones. You will get rid of fatty spots, rust and stains

Demand from oil on cobblestones can make life miserable. So let’s know, not only how to prevent them, but also how to remove them. For this, both home remedies and stronger products will be useful. Thanks to this, our driveway or path will look good.

Of course, before we say how to remove stains from paving stones, first it is worth finding out how to prevent them, because it is much easier to avoid this problem than to get rid of it. Therefore, it should be taken a few steps that will make the paving stone dirty much less.

The basis is regular cube impregnation. The appropriate preparation will reduce the penetration of the oil and other dirt into the surface. Let’s also avoid the popular error, which is repairing the car over the ankle. Let’s spread a carton or foil instead or carry out such activities in the garage.

In addition, remember that in the event of dirt React immediately when oil spills, for example. Thanks to this, it will be much easier for us to remove the stain later.

Read also:

To remove stains from oil, we must know that as we mentioned, it should be done as soon as possible so that the fat does not manage to penetrate the cobblestone. So we can collect it mechanically at the beginning, being careful not to rub the stainsbut drain the oil with absorbent material. A paper towel, cloth or sand will be suitable for this.

Only after initial cleaning of the ankle can we go to further action. The oil stain can be removed with home methods that will not damage the structure of the paving stones. These are cheap and easy methods that will cope with most dirt. Here’s what you can use:

  • Dishwashing liquid – It will remove fresh dirt. All you have to do is apply it to the stain and scrub it with a brush, and then rinse everything with warm water.
  • Baking soda or potato flour – Both of these products have an absorbent effect, so it’s worth sprinkling with a stain, leave them for a few hours, and then clean the product with a broom.
  • Vinegar – It can cope with slight dirt, so it is only suitable for use in the case of fresh and little greasy spots.
  • and baking soda – Mix both ingredients to get a thick pulp, which we apply to the stain and leave for a few hours. After this time, we scrub the dirt and rinse the paste.

When using these methods, we must remember that They require patience and should be repeated several times to get results.

Simultaneously with strong or older dirt, It is worth considering the use of specialized agents for removing oil stains from paving stones. We can buy such products in a construction or gardening store. However, we must pay attention to it that they have active detergents, biological enzymes and fat dissolving agents.

source

You may also like

Our Company

News USA and Northern BC: current events, analysis, and key topics of the day. Stay informed about the most important news and events in the region

Latest News

@2024 – All Right Reserved LNG in Northern BC