Fuel consumption is one of the main concerns of those who conduct regularly. Even small habits or vehicle conditions can influence spending over time. Among these factors, there is one in particular that usually goes unnoticed, but has a direct impact on the car efficiency.
It is tire pressure. When not at the recommended levels, the vehicle faces greater bearing resistance, which requires the engine to work harder and, consequently, to consume more fuel.
According to, a centennial tire specialist brand, “a relevant factor that is often neglected in the ways of improving fuel savings is the choice of tires and their pressure.” The brand underlines that this variable, although simple, is critical to the energy performance of the car.
Incorrect pressure can have several negative effects
Circular with tires with pressure lower than recommended contributes to increased friction with the ground. This results in a greater effort to maintain speed, leading to higher consumptions and the greatest wear of the tires themselves.
On the other hand, maintaining excessively high pressure can also be harmful. Although it slightly reduces consumption, it can cause irregular wear in the tread and affect vehicle stability.
The best practice is always to follow the pressure values indicated by the car manufacturer, adjusting according to the cargo carried and the conditions of the trip.
Regular checks are essential
Michelin also recommends that tire pressure is verified at least once a month and always before long trips. This check should be done with cold tires to ensure precise reading.
Temperature variations throughout the year also influence pressure. In the cold months, it is common for it to lower, which may go unnoticed to many drivers.
Ignoring this simple maintenance can mean a gradual increase in fuel consumption and faster tire wear.
Tire type also influences consumption
The choice of tire model is another relevant factor. There are tires developed specifically to reduce bearing resistance, which contributes to greater energy efficiency.
Tire energy labels provide information on the impact of each model on consumption, braking and noise emission.
Selecting a tire suitable for driving type and vehicle can be a strategic decision with medium term effects.
Sustainable and economic driving
Maintaining correct tire pressure is not only financial advantages. Lower fuel consumption also reduces carbon dioxide emissions, contributing to more sustainable conduction.
This care can be integrated into the usual maintenance routines, next to the verification of oil levels, brakes or filters.
With increasing energy and fuel costs, small savings per liter accumulate rapidly over the months.
Safety and savings go hand in hand
Maintaining correct tire pressure is not just an economic issue. Well -calibrated tires improve braking capacity, curve grip and wet floor stability.
Ignoring this aspect can pose additional road risks, especially under adverse weather conditions or on irregular floors.
With a few minutes a month, it is possible to improve vehicle performance, reduce environmental impact and ensure safer and more efficient driving. Tire pressure, being often neglected, is after all one of the most direct ways to control fuel consumption.
Also read:
