- The stone on the armature is not only an aesthetic problem, but also functional, leading to a failure.
- Discover the home way to remove the sediment that you will prepare with only three ingredients.
- Just put the mixture in the tap, wait 10 minutes, and the stone will fall off. Check how to secure the fittings for longer!
Lubricate in the tap and wait 10 minutes. The stone will fall off by itself
Over time, on the bathroom and kitchen, especially the chrome, all stains from the water are visible very quickly, which over time turns into a stone sediment. To maintain their neat appearance, we would have to wipe them dry after almost every hand washing or bath. Just a few drops of water to make stains appear on the taps, and its chrome surface matted. However, remember that the stone on the taps at home is not only an aesthetic problem, but the aforementioning sediment fittings can negatively affect its functionality, and even lead to failure. Therefore, as soon as you see the kitchen, act immediately. Instead of using a strong chemistry, put on a home tap desperate. You will prepare it with 3 ingredients and all you have to do is lubricate it in the tap, and after 10 minutes the stone will fall off.
The tap cleaning liquid will remove the stone. How to do it?
If we have neglected our fittings and literally “overwhelmed” with a stone sediment, it is worth using home -made will restore the armature to the former functionality. How to prepare a bathroom? Add 2 tablespoons of citric acid into a glass of vinegar and add 2 tablespoons of dishwashing liquid. Mix the ingredients and pour into a bottle with an atomizer. Spray the taps and cover them with a cloth soaked in this liquid for about 10 minutes. Of course, the thicker the layer of the raid, the longer you have to leave the fluid. After this time, the stone will fall off from the fittings and you can easily remove it with a cloth or a soft sponge.
A way to protect bathroom batteries against stone
After washing the tap, it is worth properly protected against the stone. For this purpose, just rub the previously washed batteries in your home with wax, polish them, and the water will flow quickly, which will prevent the formation of stains. The wax layer will protect the fittings for many days and make it shine like new.
Recommended article:
