In the middle of summer it is worth … thinking about venting radiators. This is not a joke, but a useful tip, thanks to which you will be warm and pleasant in winter, because the radiators will heat up all over the surface, and not just half, as is often the case in Polish apartments at the beginning of the heating season.
Thanks to this, in turn, they will not be upset to the maximum to reach a satisfactory temperature. And this can have quite positive effects on the portfolio, because bills will fall in November or December.
May interest you:
The air accumulated in radiators blocks the free flow of water, which leads to their uneven heating ”
And when the radiators work evenly, it is easier to achieve the desired temperature in the room, Thanks to which you do not need to unscrew thermostats to the maximum, which in turn translates into less energy consumption. The sooner you take care of the radiators, the better. Now there is a good time to maintain them, because you don’t have to do it in a hurry.
Regular dealing with them in this way also reduces the likelihood of having to use expensive system interventions in the middle of winter. Removing air from the installation improves water circulation and increases efficiency, which can minimize the risk of corrosion, which often leads to serious failures.
Read also:
First of all, you should learn to recognize when the radiator requires venting. It is very simple in winter, just Touch the radiator housing. If its upper part is cool and the bottom heats you and the interior can hear the noise/ bubbling, it means that there is air inside the device.
In the summer, however, it is worth venting the radiator preventively. This is especially important if you have noticed any problems with the device in the previous heating season, or it has a tendency to ahead.
Get a square key to venting the radiator or prepare a flat screwdriver if the valve allows it. Also prepare a small bowl and a cloth so as not to wet yourself and the floor during this procedure with the radiator.
Check, Is the thermostatic valve on the radiator to be prepared, look for a vent valve on the side of the radiator, insert the tool and unscrew it to hear characteristic hissing (sound of the descending air).
When you notice the flowing water, turn the valve carefully and check the pressure in the installation. Do not touch the water leaking from the radiator with naked hands, as it can be hot, which causes the risk of burn. You can find more detailed information on the method of venting radiators on many specialized sites related to DIY/ construction.
