Do you exchange batteries in the remote control and it still doesn’t work? The reason will surprise you

by Andrea
0 comments
Do you exchange batteries in the remote control and it still doesn't work? The reason will surprise you

The pilot has an infrared diode (IR), which sends invisible impulses to the TV. Sometimes this path is disturbed, which is why the receiver stops responding to the sent signals. The most common cause is the dirt of the transmitter, covering the receiver or too much distance between the equipment.

Few people would think that other devices may cause signal disruptions. The causes of the problem should be sought in … kitchen or lighting. In this article, you will find out what equipment affects the operation of the pilot and TV and what to do so that everything will work again as it should.

It is everyday devices that interfere with the pilot’s operation. It’s about kitchen appliances and those in the room where the TV stands. Here is the list:

  • Other pilots and devices with infrared – for example, they can be air conditioners or audio devices;
  • monitors and fluorescent light sources – older lighting types generate interference;
  • LED bulbs – the receiver loses the signal due to interference by the emission of some devices operating in a close infrared band;
  • microwave oven – generates radiation, disturbing the pilot’s signal, especially when it stands near the TV.

Also read:

To check if the problem is in the devices, the easiest way to turn them off. We can also bring the pilot to the TV. In the event that it works closely, we are dealing with a signal losing by any of the above equipment.

It is worth using a trick with a phone. Just direct the remote control towards the camera and press the switching button. If a flashing light appears on the screen, it means that the diode works properly.

When we want to turn on the TV again and the pilot does not work, then we are dealing with the signal drowning out by the devices.

We will easily make the pilot work. To start with, let’s change the location of the devices. For example, let’s move the microwave from the TV.

It is also worth turning off and even replacing the lighting, which drowns out the signal. Of course, we are talking about LED bulbs. We also recommend wiping the remote control with a soft cloth. After all, dust also causes disturbances.

If we have done everything in our power to make the pilot act and he still refuses to obey, then you will need to help the website. It is possible that the receiver or decoder fails.

source

You may also like

Our Company

News USA and Northern BC: current events, analysis, and key topics of the day. Stay informed about the most important news and events in the region

Latest News

@2024 – All Right Reserved LNG in Northern BC