The fact that in one room it works perfectly, and in the other the signal is weaker, interrupts constantly or does not exist at all, is not a coincidence. If you need a stable Internet connection for work or want to watch your favorite series, you don’t necessarily have to move to another room right away.
Perhaps a minor… rearrangement is enough. It is often the case that the quality of the wireless connection is reduced by home equipment, such as: Whether . This is not a joke, just a fact that many people do not realize.
Home appliances can block or interfere with Wi-Fi (especially 2.4 GHz) more often than you might think. And that’s because many of them emit electromagnetic waves in bands of similar frequencies and may attenuate the signal transmitted by the router. If something disturbs the waves, the connection becomes weaker or disappears.
The simplest The solution that will help is… . Of course, it will not increase the power of the router, but it can remove obstacles that dampen the wavesso the effect can be very satisfying (even 20-40 percent better).
Try to keep the router located in the middle of the apartment, in an open place at a height of approx. 1-1.5 meters, away from metal and electronics. Absolutely do not place it against a load-bearing wall behind a TV or a refrigerator. These are the worst places. As a rule, it is also better to use the 5 GHz band (less interference than 2.4 GHz).
There are many devices at home that can unintentionally block the Wi-Fi signal. This includes: a microwave oven operating at a frequency of 2.4 GHz (the same as most Internet networks). May cause interference during operation.
It is also problematic in the kitchen which does not emit interfering signals, but weakens the operation of the router due to the metal casingwhich reflects and attenuates Wi-Fi waves (similarly to a dishwasher or an oven).
In the living room, the Smart TV may be responsible for weakening the Wi-Fi signal. Especially if it is connected to multiple devices. Wireless cameras, speakers and monitors are also often among the culprits. Especially when there are many devices in one place.
This is not the end yet, because LED lamps and low-quality switching power supplies can also emit electromagnetic interference, negatively affecting the Wi-Fi connection.
To the non-obvious Apartment furnishings that may cause poor Wi-Fi coverage should be made of metal, as this material reflects radio waves..
Therefore, do not place the router on a metal shelf, next to a stand or metal trinkets. Also, do not place the router next to large mirrors or other glass surfaceswhich act as a barrier on the signal (this also applies to an aquarium, because water absorbs waves).
The Internet often does not work well due to the layout of the apartment itself. If it has thick concrete walls, and the router is located on the ground floor, the signal may not be satisfactory on the first floor.
