Fittings, whether in the kitchen or in the bathroom requires proper care and maintenance to maintain its elegant appearance. Unfortunately, daily contact with water, cosmetics and chemicals does not make this task easier, as it quickly causes streaks, sediment and a dull coating to appear. How can you deal with it without using strong chemicals?
The faucet can shine like new if it is properly cared for and cleaned. Unfortunately, they remain on the agenda, and hard water is most often the culpritthe remains of which remain on the tap or sink. It is also very easy to create stains because they are caused by the drying of water drops on the surface, as well as the remains of soap and cosmetics.
It doesn’t look very aesthetically pleasing, and wiping the tap dry after each time it gets wet seems downright impossible. Luckily There are home remedies that will not only remove the sediment that has already formed, but also protect the surfaces against the formation of new ones.
The key to an aesthetic appearance is to restore the fittings to their former glory. This can be done with help a mixture that is simple to make and works brilliantly, which arises from a combination of vinegar, citric acid and dishwashing liquid. Just dissolve two tablespoons of acid and the same amount of liquid in a glass of vinegar.
The resulting mixture it is best to pour it into a bottle with an atomizer and apply it to dirty fittings. To enhance the effect, you can place a cloth with the solution on the tap and leave it for about 20 minutes to give it time to work. As a result of the action of all ingredients, any The residue should start to come off after gently wiping it with a sponge or cloth.
See also:
However, restoring the cleanliness of the fittings is not everything. This won’t last long if the water remains hard and the tap is used frequently. Therefore, it is worth securing it properly reduce or even eliminate the formation of stains. A protective layer that can be created with a popular product like this will help with this cosmetic olive.
That’s enough a few drops applied to a microfiber cloth to create a delicate protective layer on the fittings. Additionally, the oil applied in this way removes delicate streaks and stains, creating a layer of protection against subsequent stains. Thus, the fittings remain clean for a longer time, because thanks to the oil, stains and streaks cannot appear.
Therefore, it is enough to combine thorough cleaning of the fittings with a mixture of vinegar, citric acid and dishwashing liquid with lubrication with cosmetic oil to get a shiny faucet and a sink free from stains. Regular use of these tricks will keep your fittings in good condition for a long time. Interestingly, some they use wax as an alternative to cosmetic oil, which is usually used for car body care.
