When the key breaks in your lock, it is a situation that can really torment you. The idea of being left standing in front of a closed door is not exactly pleasant. Fortunately, there are several ways to solve this problem without having to call a locksmith right away. How to get home when this happens?
If your key has broken in the lock and a part is left inside, the first step is to keep calm. Quick and thoughtless attempts will only make the situation worse. Before doing anything, make sure the lock is not under pressure. This means do not turn the key or use force to get the fraction out. The more you push, the deeper the rest of the key goes into the lock.
Watch a video from the YT creation of the Repairman channel – How to remove a damaged key from a lock
Source: Youtube
One of the easiest tricks is to use tweezers. If you’re lucky and a piece of the key is sticking out, try gently grabbing it with tweezers and carefully pulling it out. If the key is deep and the tweezers can’t reach, a paper clip or thin wire can help. Straighten the paperclip so that it has a sharp end, and try to move the part of the key in the lock with it closer to the edge.
Another option is erasing the lock. If you have spray oil or WD-40 on hand, spray a small amount directly into the lock. Lubricant can help reduce friction and make it easier to pull the key out. Then try using a pin or hook to carefully slide the key out. But be patient and proceed slowly so as not to damage the lock.
If you can’t get the key piece out, you can try something called the glue method. Apply a small amount of super glue to the end of a match or thin stick, place it against the broken key and hold it for a while. After drying, try to carefully pull out the key. This procedure must be done with great care, as too much glue can permanently damage the lock.
If you can’t get the key piece out, you can try something called the glue method. Apply a small amount of super glue to the end of a match or thin stick, place it against the broken key and hold it for a while. After drying, try to carefully pull out the key. This procedure must be done with great care, as too much glue can permanently damage the lock.
In order to prevent similar situations from recurring, it pays to take care of prevention. Lubricate the lock regularly to reduce wear on the mechanism. At the same time, avoid using old or damaged keys that could break easily. And if you already see that the key is slightly bent or cracked, you better get a new one made. This will save you a lot of trouble.
Having an emergency plan and a few basic tools on hand can go a long way in helping you in such a situation. Next time you will be prepared and such an inconvenience will not easily throw you off.
Source: gvlock.com
