Metal fences often fall victim to rust. However, especially if there are not many bonfires, we can deal with it quickly. It is enough to properly remove rust and protect the elements so that the fence can be used for a long time. Appropriate maintenance will make metal elements have longer life.
One of the most important things we often forget is the usual cleaning of the fence. Seemingly it seems unnecessary, after all, this element is outside. However, washing metal elements from time to time effectively eliminates the risk of corrosion. Dirt can contribute to the occurrence of rust bonfires and faster spread to the entire fence. How to wash the mesh? It is enough to do this several times a year with soap and water water. It is also important to dry the fence well later. This type of cleaning should be carried out on a sunny, warm day.
In addition, when painting the fence, even if there was no rust on it before, it is worth focusing on corrosion -resistant paints. This reduce the risk of bonfires. In addition, the quality of used materials is not without significance, it is better to focus on products from proven companies.
Also read:
To start with, it is worth washing the first layer of dust with water, then we have a chance to see all the bonfires of rust. In order to remove it, mechanical abrasion with sandpaper or wire brush is enough. This will work if the rust is not enough, in the case of more it will be necessary to use an angle grinder and sandpaper. You should get rid of each of the corrosion outbreaks – if there is too much of it, you can also consider giving the element to sandblasting.
In the event that her rust impossible to remove, e.g. burned the holes in the fence, it will be necessary to replace the fence span, wicket or gate. This is an important step, because metal elements busy with rust become fragile, which makes them easily damaged.
Check also:
After cleaning the fence of rust The departing patches of paint should also be removed. This is very important because if we do not do it, the new layer will not adhere well – it will not protect the metal and will look much worse. Then paint the fence with decorative, anti -corrosive paint – in this case Old layers of paint can be left, especially if they adhere well to the elements. This method is less effective, but definitely faster and if there was few rust bonfires, we can use it without fear.
A more effective method of protecting the fence is divided into several stages. To start with, remove the whole old layer of paint and thoroughly clean the metal elements. Then we apply three products to the fence in the order: anti -corrosive preparation, foundation and decorative paint. This method will allow you to stop the development of corrosion for a long time.
