House heating Rush to Action and buy for PLN 6 before the heating season. The house will be warm and the heating bills are lower than ever. A way to heat the house

• The heating season is fast approaching, and heating bills can increase drastically, especially with leaky windows.
• The solution to the problem of escaping heat is insulation foil, which creates an additional barrier, reducing heat loss and loading of radiators.
• Check how to easily mount the insulation foil for less than PLN 7 and save on heating!

Rush to Action and buy for PLN 6 before the heating season

The heating season in many homes has already started or will start at any moment. However, before we start the radiators in our mixtures, they should be prepared for this – they are to vent them. Why is this important? Thanks to this, they will reflect heat firmly and evenly without straining our wallet. Well, amended and will consume more energy for heating, and as a result heating bills can increase drastically. Another problem in a house that does not allow you to preheat the rooms in our house are old windows. Those equipped with one glass or leaky frames make a lot of cold from the outside fall into the apartment. As a result, thermostats in radiators work with increased power. If this problem concerns you, rush to Action and buy insulation foil there for windows for PLN 6.99.

Window insulation foil. How does it work?

It is an extremely useful gadget in houses with outdated windows. Effectively reduces heat loss from rooms, thanks to which the radiator does not have to work at increased revolutions, and in the house it is warm. The insulation foil creates a barrier between the glass and the interior of the room. The air trapped between the foil and the glass acts as an additional insulator, slowing down the heat flow. The foil also limits the air movement at the glass. The cool air that contacts the glass is heated and rises, and cold air flows in.

Below you will find instructions on how to mount the insulation foil on the window.

Installation of insulation foil on the step by step window

Installation of insulation foil on the window is relatively simple and can be done by yourself. Here is the step -by -step instruction:

You need:

• Windows insulation foil (adapted to the size of the window)
• Double -sided tape (usually attached to the foil)
• Scissors or wallpaper knife
• Measure
• Cleaning cloth
• Hair dryer (optional)

Installation steps:

1. Clean the window frame and glass thoroughly. Use warm water with a detergent and then dry. Make sure the frame is clean and dry so that double -sided tape holds well.
2. Measure the inside of the window frame where double -sided tape will be glued.
3. Stick a double -sided tape along the entire inner edge of the window frame. Make sure the tape is well stuck. Remove protective paper on one side of the tape.
4. Expand the foil and measure it. It should be slightly larger than the glass surface so that it can be cut later.
5. Gently put the foil to double -sided tape, starting from one corner. Gradually glue the foil to the tape, gently tightening it to avoid wrinkles.
6. Make sure the foil is well stuck to the tape throughout the entire perimeter.
7. If wrinkles or folds appear on the foil, you can use a hair dryer. Heat the foil from a distance of several centimeters, and then gently smooth it with your hand. The heat will help the foil stretch and adhere to the glass.
8. Use scissors or wallpaper knife to carefully cut the foil along the edge of the window frame. Remove excess foil.
9. Check that the foil is well tight and adheres to the glass throughout the surface. If you notice any shortcomings, you can improve them gently by heating the foil with a dryer and smoothing.